Keywords: 2 cores pigtails, 4 cores pigtails, 8 cores pigtails, optical bundle pigtail, optical ribbon pigtail, soft fiber cable connector, duplex patch cord, waterproof pigtail, mode conditioning patch cord, Attenuated Patchcords, MPO Fan Out, OM3 Patch cords, LC loopback patchcord
 bundle pigtail | optical ribbon pigtail | soft fiber connector | waterproof pigtail | MPO Fan Out
OM3 Patch cords | Attenuated Patchcords | LC loopback patchcord | mode conditioning patch cord
PM fiber optic cables | Ruggedized Fiber Cable | Plastic fiber optic cable Toslink
※ Definition:
Fiber optic patch cords, International Telecommunications Union (ITU) defined this material as a passive component, which meets the CCITT requirements. And it is widely used for taking down linked components between fiber optics.
※ Application:
- Communications network
- Network of access of fiber broadband
- CATV
- Fiber Optical instruments
- LAN
※ Specification:
Type |
loss of insertion
(standard international) |
loss of insertion (typical) |
loss of return
(standard international) |
loss of return (typical) |
PC |
≦0.3dB |
≦0.1dB |
≧40 dB |
≧45 dB |
UPC |
≦0.3dB |
≦0.1dB |
≧45 dB |
≧50 dB |
APC |
≦0.3dB |
≦0.2dB |
≧60 dB |
≧65 dB |
※ Relialble Test Item and Condition:
Test Item
|
Programs conditions |
aging |
temperatura85oC, 85% relative humidity, 14 days changes of the loss of insertion ≤0.1dB |
circulation of the temperature |
-40oC~+75oC, 10%-80% relative humidity, 42 circulations, 14 days changes of the loss of insertion ≤0.1dB |
immersion of the water |
temperature 43oC, PH5.5, 7 days changes of the loss of insertion≤0.1dB |
vibration amplitude |
1.52mm, frequency 10Hz~55Hz, 2 hours for three directions X, and, Z changes of the loss of insertion ≤0.1dB |
flexion of load |
0.454kg load 100 periods changes of the loss of insertion ≤0.1dB |
load return |
0.454kg load 10 periods changes of the loss of insertion ≤0.1dB |
resistance to the tension |
0.23kg traction (bare fiber), 1.0kg changes of the loss of insertion≤0.1dB |
impact |
1.8m height, 3 directions, 8 times/direction changes of the loss of insertion ≤0.1dB |
reference |
Bell-core TA-NWT-001209 changes of the loss of insertion ≤0.1dB |
※ Ordering Information :
1 2 3 4 5 6 7 8 9
(K)OC-□/□-□/□-□-□-□-□
1.K - Means Armored Optical Cable
2.One End Connector Type: FC,SC,ST,LC,E2000,MU... ...
3.End Grinding Type:PC, UPC, APC
4.The other side Connector Type: FC,SC,ST,LC,E2000,MU... ...
5.The other side Grinding Type:PC, UPC, APC
6.Optical cable type: SM, MM
7.Cores of Fanout: 4, 6, 8, 12... ...
8.Diameter of Cable: Φ3mm, Φ2.0mm,Φ1.80mm,Φ0.9mm, Φ0.6mm
9.Patchcord length: Customer Specified
※ About waterproof fiber optic pigtails:
Fiber Optic waterproof pigtails are widely used in data transmission network, typical types are with 3 fiber cores, 6 fiber cores or 12 fiber cores. Abright Optic Tech. produce the fiber optic waterproof pigtails strictly according to IEC standards, the products feature low insertion loss, high return loss, good interchangeability and repeat push-pull performance, which make them easy to use. The waterproof fiber optic pigtails are with strong jacket and waterproof sealed head connectors; they can be used in harsh environment.
 
※ Features:
- Various kinds of connect interfaces optional such as SC,FC,ST,LC, etc.
- Ceramic ferrules, PC, UPC, APC polishing optional
- Low insertion loss, high return loss
- Waterproof
- Out diameter of inner fiber: 3.0mm, 2.0mm, 0.9mm
※ Specification:
Type |
Single mode PC |
Single mode APC |
Multi mode PC |
Insertion loss |
≤0.2dB |
≤0.2dB |
≤0.2dB |
Return loss |
≥50dB |
≥65dB |
≥45dB |
Repeatability |
≤0.2dB(1000 times) |
Temperature range |
-40℃ - +85℃ |
※ About MPO fan-out fiber optical pigtails:
People develop the MTP and MPO types, the MTP and MPO type are multi fiber connectors, each one of the connector are used with Ribbon type fiber optic cables which contain multi fiber in one single jacket, so that they greatly save space and are very convenient to use.
Based on single ferrule MT technology, the ribbon fiber optic cable assemblies provide up to 72 fiber connections in a single point, reducing the physical space and labor requirement, while providing the same bandwidth capacity of a multi-fiber cable with individual fiber/connector terminations per fiber.
※ Features:
- High quality MPO and MTP connections
- Multiple fiber types ,PC or APC applications.
- Space-saving
- Custom assemblies available
※ Specification:
Items |
Single mode UPC |
Single mode APC |
Multi mode UPC |
Insertion Loss (dB) |
≤ 0.2 |
Exchangeability |
1000 times mate/demate cycles |
Temp. Range |
≤ 0.2 dB ( - 40 to +85 degree centigrade) |
|
.jpg)
